DIY Electric Skateboard Motor In Chrome (6380/170kv) Sold Out On Retail Site

  • 04

$66.00 (-40%)

94

  • Modified Item: No
  • Condition: New
  • Custom Bundle: No
  • Model: 6380
  • Brand: Torque boards

    • Chrome Electric Skateboard Motor (6380 170kv).
    Connecting ports need to be soddered together but is not a tough task at all. This motor specifically is sold out on the retail site and is very desirable by fellow esk8 riders. Made for someone building a DIY BOARD.
    Fits a 63mm motor mount
    This motor is a beast with 4100 watts
    80 amps max
    12s volts max
    5.06Nm max torque
    170kv max rpm (voltage)
    Motor weight 2.25lbs
    Motor shaft – shadt bote diameter 8mm, 41.5 mm length.
    Motor wire – 150mm silicone 12awg wire
    NEEDS 5.5mm GOLD BULLET CONNECTOR FEMALE
    Wire config.
    Blue = A
    Black = B
    Yellow = C
    Sensor wire – standard rc sensor wire JST – ZH 6pin 1.5mm pitch
    Internal pcb with 120 degree hall effect sensors
    Motor can be used with or without A sensor. Sensor less operation is most common.
    VESC sensor wires required to use with VESC.
    Wire configuration:
    Red equals 5V
    White equals temp
    Blue equals a
    Yellow equals C
    Green equals B
    Black equals GND
    Any additional questions please dm god bless.

    Main Menu